1 / 3
Boxing wrap roller / container
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Share Alike
Tested with 0.4mm nozzle PLA 10% fill, no special settings (except for spinner)
Step files should be correctly oriented.
The spinner has a ring to help it stay connected to the lid. The lid screws onto the body.
Slide the velcro strap into the shaft, screw the lid onto the body and roll like an old fashioned telephone. Afterwards the wrap slides off the shaft.
Edit: increased the strength of the spinner after breakage, there's now a very thin slit to force the slicer to put walls inside the bottom of the shaft (the slit is 0.1 so it coalesces), stronger setting is also recommended, so 4 walls instead of the usual 2 @0.4mm.