1 / 4
Desperado Adjustable Spring Spacer (Shell modifications required)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adjustable spring spacer for the Desperado
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 36
- Makes
- 0
- Views
- 321
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Add an adjustable spring spacer to the Adventure Force Desperado.
Adjustment range is ~5mm to 30mm.
Minor shell modifications are required to use this. A 16mm hole needs to be made on the back of the blaster.
The assembly of this spacer is:
- Insert Adjustable Spring Spacer Screw (Middle Top) into Adjustable Spring Spacer Base (Middle Bottom) where the base is circle side up.
- Add the Adjustable Spring Spacer Knob (Bottom) to the bottom of the screw with CA glue or another adhesive for plastics.
- Add the Spring Guide (Top) to the top of the screw head with CA glue or another adhesive.
- Drill or cut a 16mm hole in the back of the blaster that is center from left to right and center from top to bottom. This will allow the screw to pass through the shell to the outside for adjustment.
Attached photos also show the assembly process.
This modification will compromise the integrity of the shell on the back. Remove only what is required. Too much shell removal will lead to blaster failure.