Playground monocular
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
I made the bottom of the monocular very thick to prevent any risk of eye injury.
You only need one of the thin parts of the monocular. I have made different sizes to match various 3D printers.
You may want to scale the thinnest part down to 97% on both the Y and X axes.
BOM:
2* (M3x20 to M3x25)
2* Any outdoor screw with a head diameter of max 9 mm and a shaft diameter of max 4 mm.
I recommend printing with PETG if it's meant to be outdoors for a long time. However, I’m doing a small experiment, so I printed it in PLA.
You could also make this file multi-color.
Use support on everything except the threads.
If you want to use this for commerciel use write to me and we will figure it out.
2 wall
4/5 top/bottom layers
18% infill gyroid