1 / 4
A1 Mini Poop Purge Bucket Gridfinity
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity Purge / Poop Bucket for A1 (mini)
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 35
- Makes
- 0
- Views
- 297
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I had some space next to my printer and was thinking: Hey, why not put a Gridfinity base and a poop/purge bucked there…
Its size is 2x4, height 6 at the side facing the printer and 21 on the opposite side.
The holes for the magnets are press-fit (6mm x 2mm). I recommend using my https://www.printables.com/model/738693-gridfinity-magnet-jig-pressure-fit
I also added a version without magnets but did not print that one myself.
Recommended Print Settings that worked for me:
- PLA works just fine
- 0.6mm nozzle
- 0.2mm layer height for the first 5mm to ensure a nice fit with the baseplate
- 0.42mm layer height above 5mm to speed up the print