1 / 7
FrankenWinder - Filamentalist Mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of Filamentalist Rewinder for the Filamentalist Enclosure and Filamentalist F1mod
- Rating
- 5 / 5
- Likes
- 73
- Downloads
- 232
- Makes
- 2
- Views
- 2,132
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I like the Filamentalist F1 mod but also like the way the Filamentalist Rewinder fitted in the enclosure so I made this
I printed in ABS using the Voron Print Specs
Amount of filament used approx.
black 90g
red 70g
BOM
| Qty | Part |
| 2 | 8mm x 70mm Steel Smooth Rod (80mm will also work) |
| 5 | 608 bearings |
| 1 | HF081412 One-Way Bearing |
| 1 | ECAS press-in pneumatic fittings for the bowden tubes (like used in ERCF) |
| 2 | O-rings - 20mm ID, Thickness 3.5mm Nitrile Butadiene Rubber |
| 1 | Spring - 304 Stainless Steel, 6mm OD, 0.6mm Wire Size, 15mm Free Length |
| 13 | M3 Heatset Insert |
| 1 | M3x40mm SHCS |
| 1 | M3 Washer |
| 6 | M3x30mm FHCS (Optional) |
| 3 | M3x18mm FHCS (16mm will work) |
| 12 | M3x12mm SHCS (8mm to 16mm will work) |
| 6 | M3x8mm SHCS |
| 6 | M3x4 Grub Screw |
| 2 | M2x8mm BHCS (for optional 2 part Center Drive Roller |
| 2 | Rubber Band Size #82 |