Locking Caliper Cap (15cm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Avoid turning on by accident.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 1
- Views
- 50
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Cheap Chinese plastic calipers that turns on automatically has a tendency to turn by itself when it is placed in a drawer. For that reason I designed this cap, that fixates the jaws of the caliper in place, so it can't move and hence can not turn on by itself. This cap is for a larger 150mm caliper - the jaws measure 28mm in width and approx. 34mm in height. Here printed in generic black PLA on an A1 Mini.
NOTE: I have added a version 2 of this cap (caliper_cap-Bodyv2.stl) which is a little shorter, so it fits calipers which has a little shorter jaw height than 34mm. The new one is 33mm and I recommend you use this instead of the original!