FormD T1 Exhaust Plenum with Shroud
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom case fan shroud based on two other models combining features of both.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 104
- Makes
- 1
- Views
- 1,465
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Requires 10x M3x4x5 heat set inserts and 8x M3 screws to mount your fans. Fan cable hole is sized for a 15mm diameter grommet with a 2mm wide groove (not pictured). No single-piece version included since I wanted the cable grommet in the middle to be easier to work with and the split assembly deals better with any warping you may have if you use higher temp filaments.
My personal set up uses a Sapphire Nitro+ 7900GRE, 2023 SF750, ASUS B650E-I, and Thermalright AXP90-47 with no custom cables. There should be sufficient clearance for most parts, especially if you have custom cables.