Sig P320 Flux Raider Bag Holster

Way to put a SIG 320 flux raider into a bag without it moving around… But I couldn't find any commercial solutions (due to all the accessories I'd put on- specifically the F10 top charging handle from tactical development…) So I made this. 

This enables me to have consistent placement and safety (covers trigger) while I carry it inside of a sling vertex backpack.

I built this with a base that has a few registration pins on top to ensure that the lid that drops onto it fits up perfectly… The holes were specifically sized for Nut inserts For M4 Size.

I designed this around a raider that has a F10 front sight\charging handle, gas pedal , as well as a surefire X300, and a red dot on top (Aimpoint MicroT2)…. So it will work with all those clearances.

This requires you have the ability to put in M4 brass nut inserts… there are four of them. 

I used 4xM4 by 40 Fasteners to assemble.

I bought some adhesive velcro and applied it to the bottom of this so it would stick on a backpack with hook and loop padding.

bill of materials:

1. PLA: 
   1. 334 grams
2. M4 x 40 Hex Socket Head Cap Bolts
   1. 4 each
3. Threaded Inserts Heat Set Insert M4 Metric Knurled Nuts 
   1. 4 each
4. Adhesive velcro (optional) 
   1. as much as you want (Apply to the bottom if you want to stick it to something)

here are some Amazon links to the components that I used:

• Nut inserts HERE
  • I used these heat set insert tips on my soldering iron
• M4 BOLTS That I used are HERE
• Adhesive velcro strips HERE