Imperial 6-in R2 Vent Removable Screen Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A removable holder for mesh screen to be installed on an Imperial 6" R2 vent.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A removable holder for mesh screen to be installed on an Imperial 6" R2 vent. Specifically model number VT0503-A.
Print using a filament that will survive UV from the sun / the output temperature of any air exhausting from the vent. I'm using this on the intake/exhaust vents for my heat recovery ventilator (HRV), so temperature isn't a huge concern.
The screen retention insert is meant to be a press fit so no adhesive should be required, but feel free to use some if desired. There are also two small holes on the main body that could be used to screw into the vent if desired but the cover is a tight fit so it's not really required.
I used a stainless steel mesh in an attempt to be critter proof, but you can use whatever screen you want.