1 / 3
Golden Foamer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
The two attached makes were printed in golden PLA and greenish semitransparent PET.
While ABS and PLA prints are typically watertight right away when printing in 0.15mm/4 perimeters, the PET print required post-processing:
I rinsed the inside with transparent resin/epoxy, so that they became watertight after about 10 hours.
I'm attaching a “test spindle” that'll print quickly and will allow a quick test of the material and the attached foamer.