MRB063A USB Cable Checker Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case for a USB Cable Checker model MRB063A.
- Rating
- 4.8 / 5
- Likes
- 16
- Downloads
- 106
- Makes
- 4
- Views
- 460
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case for a USB Cable Checker model MRB063A available from many
sources such as AliExpress. The top part shall be printed with is face on the
bed. The 3mf file contains the top part with lettering to be printed with 2
colors. The USB B connector cap must be glued with a few dabs of superglue. 4
2.5 mm x 5 mm brass inserts along with 4 M2.5 x 8 mm screws are required. They
can be replaced with other screws without brass inserts.
Support material is optional but not required. An infill of 20% is
recommended.
This object main web page is:
http://www.ctheroux.com/mrb063a-usb-cable-checker-case/.
This object was designed using Solid Edge Community Edition.
You can request the source files on the page listed above.