FreeGrid Metric Bolt Boxes with Labels
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
4x1 FreeGrid boxes for M3, M4, and M5 button head bolts, with bins for 8, 12, 16, and 20mm bolts, plus one for hex nuts.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 37
- Makes
- 0
- Views
- 249
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
A set of 4x1x3 FreeGrid boxes with five bins for storing M3, M4, and M5 button head metric bolts. The front of each box has a label for the bolt size and labels at the top of each bin for 8, 12, 16, and 20mm bolt lengths, plus one for hex nuts. Each bin has a curved ramp on the front to make it easier to scoop out the contents.
Made with the recently released (September 2024) FreeGrid Workbench for FreeCAD and FreeCAD 1.0 (RC2) so you can adapt the boxes to other bolt sizes and heads. Uses the Atkinson Hyperlegible font for the labels (available under the SIL Open Font License). FreeCAD files are included so you can change the labels.
Designed for a multi-filament print. If using a single filament, the label on the front prints flush and won't be visible. If you don't print the lettering, the label will be inset. The labels on the bins are outset. Can be printed without supports. The most important thing is to make sure your magnets have the same orientation throughout the whole system.
More about the FreeGrid system and FreeCAD tools to build your own modules is available on my FreeGrid page.