1 / 1
LM2596 converter case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for LM2596 DC buck converter module to use with banana sockets
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 37
- Makes
- 0
- Views
- 277
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
BOM:
- LM2596 module
- Banana sockets 4 mm - 4 pcs.
- M3 x 10 mm screws (recommended, but any length between 6 and 14 mm should work) - 4 pcs.
- Wires - 10 cm
Instructions:
- Import .step file into your slicer, split object to parts, spread them on your bed (remember about button, it's not print in place!) and orient them with flat sides facing the bed and print.
- Solder wires to socket connectors and module (or use screw terminal).
- Attach wires to sockets placed in their holes with provided nuts.
- Place a button in its hole with thinner part facing the top.
- Put module inside the case.
- Mount the bottom lid with screws.
