1 / 1
Halloween ghost Neon light
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Halloween ghost Neon light
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 45
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
What you need:
- All 3D printed parts
- 12v neon light (1 meter)
- On/off switch (L 15mm x W 10.5mm)
- 12v 400mA power supply
- 7xM3 6mm screws
- EU power cable
Assembly:
The assembly is very straight forward.
- Print the parts
- Place the Silicone Neon light into the frame
- Cut the Neon light to appropriate length (Warning: make sure you cut the neon light with a black markings on it )
- Solder the ends with a wire (Warning: make sure to test the terminal before soldering)
- Slide the wire into the middle hole of the neon_head
- Screw in the two M3 screws on the two wholes on the bottom side
- fit in the on/off switch on the neon_head
- Slide the Eu power cable on the hole of the neon_base
- using the holder_base to secure the power cable from moving by using the 2 M3 screws on the neon_base
- Follow the wiring diagram
- Finally close of the whole thing by using 3xM3 screws to complete the assembly
Wiring Diagram :
Happy Printing