1 / 2
Gpro wheel power supply holder to playseat trophy
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made a bracket to hold my gpro wheel power supply under the pedal tray. Used washers and slightly longer bolts.
- Rating
- 3 / 5
- Likes
- 8
- Downloads
- 28
- Makes
- 1
- Views
- 552
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
Got tired of having my wheel power supply ziptied under the pedal tray. I used slightly longer bolts with washers I had lying around to mount it. Probably a good idea to slice around the holes in the slicer and change infill to a higher amount. But I forgot, and it bolted down fine. Could also use this under a desk/back side or whatever to mount the power supply to. Made the cross bar to sit under the straps to keep it from moving side to side. Need to print one cross bar, and 2 mounts.
