1 / 2
Fabritec Base Cabinet Drawer Front Clips
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the "drawer front clip" for the Fabritec base cabinet.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 32
- Makes
- 0
- Views
- 106
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
This is the "drawer front clip" for the Fabritec base cabinet. I found a few models online, but it's too thick and the “anchor" sections are missing. So I ended up drawing my own.
Here's the Fabritec's installation manual - http://www.cuisine-eurostyle.com/wp-content/uploads/2014/04/PLAN-0317.pdf
Slicer Settings:
- Layer: 0.2mm
- Infill: 10%
- Support Structure: Normal
- Support Density: 15%
I printed it anchor side down with support. Adhesion is going to be a problem, I used a glue stick on a PEI flex plate.