CC Bec Pro Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clip-in mount for a Castle Creations BEC Pro (20A)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 35
- Makes
- 0
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
The Castle Creations (CC) BEC Pro is a commonly-used high current BEC, that unfortunately often needs to be secured in place using velcro or zip ties. This simple, two-piece print provides an easy clip-in means to secure the BEC in place.
All parts should be printed on their sides for maximum strength. This ensures the layer lines run vertically from the bottom to the top of each clip.
Several options are available depending on what works best to secure the mount in place:
- Option A: Tabs at each end of long axis for mounting screws (m3/m4)
- Option B: Tabs at each end of short axis for mounting screws (m3/m4)
- Option C: No tabs (ideal if you intend to simply glue the mount together and into place)
UPDATE: I have added “alt” versions of each unique part that have only a short stub instead of the full clip. This allows you to mix and match to create combinations that have only two clips instead of four, making it easier to insert/remove the BEC.