1 / 6
ORHS 471 - GP7u Locomotive for Dragon Railway — image 1
1 / 6

ORHS 471 - GP7u Locomotive for Dragon Railway

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The Dragon Railway GP7, modified into a GP7u and with an ORHS 471 livery for AMS.

Rating
0 / 5
Likes
62
Downloads
410
Makes
0
Views
1,772
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This is rambros' excellent EMD GP7 model for Dragon Railway, remixed into a GP7u and with an ORHS 471 livery.

 

ORHS 471 is an EMD GP7u owned by the Orrville Railroad Heritage Society of Orrville, Ohio. It started life in 1950 as MEC 571, a standard GP7. After 35 years of service it was upgraded by Maine Central's Waterville shop to have a unique crew cab and dynamic brakes, and was renumbered #471. Following a period of service with the Connecticut Department of Transportation it was retired and acquired by the ORHS to pull excursion trains. 

 

As far as I know, #471 is the only GP7u with this style of crew cab.  See the ORHS site for more: https://orrvillerailroad.com/equipment.html

 

This contains the new files for the ORHS livery, the rest of the parts and assembly manual can be found on the original model page: https://www.printables.com/model/375826-gp7-locomotive-open-source

 

I've included the pre-bent models for the railings. I found these easier to install and better looking than trying to hand bend the flat railings. The 3MF shows how I oriented and supported these. 

 

The K5LA horn included is by manimal and can be found here: https://www.thingiverse.com/thing:4088789

 

Under Files there are individual STLs for all the new and remixed files. For the body and lid there are one piece STLs that can be printed single color (no livery), and split STLs in a seperate folder for multi-color printing. There is also a Bambu 3mf with the entire locomotive colored oriented and supported. 

 

The small details (horn, bell, bell mount, MU stands, and number plates) had to be printed with a .2 mm nozzle, the rest can be printed with a .4 nozzle. 

I used PLA for everything except the drive gear, which should be PETG or ABS. I've had the little gear on the motor strip out when printed in PLA.

Tags