Arrow Square
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.74 – €0.90 net (excluding VAT)
For file: Arrow_Diameter_Test v3_0.4n_0.2mm_PETG_MK4IS_38m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.82 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 38.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a tool that can be used to ensure your arrows are square after they have been cut to size.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 57
- Makes
- 0
- Views
- 309
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
This is a tool that can be used to ensure your arrows are square after they have been cut to size. The slot works for 220 grit sandpaper with enough friction to hold it in place, but it can be secured with tape if desired. By rotating the arrow shaft against the sandpaper, the freshly cut tip will become orthogonal to the shaft with cutting imperfections removed and smoothed.