1 / 3
M16 to 8mm barb hose fitting used for an oil filter — image 1
1 / 3

M16 to 8mm barb hose fitting used for an oil filter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

8mm Hose fitting for a M16 thread used for filtering with a oil filter relocation mount

Rating
0 / 5
Likes
3
Downloads
42
Makes
0
Views
270
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

I wanted to filter some oil through some kind of filter so i had a oil filter relocation kit which allows you to move the oil filter and mount on the car to the firewall for easier changing of the oil filter or putting a cheaper generic filter or bigger filter on your engine these usually have aluminium fittings but I did not have any fitting to attach to 8mm tube that i connected to an old electric fuel pump so i made some fittings that take an o-ring and will easily adapt the filter to the 8mm hose , this is for use with cold oil so its not meant for hot oil unless you maybe printed with ASA for higher temperatures , could be used to filter anything really . This barb is pretty generic so you can use it on anything you wish to attach a 8mm hose that has a M16 thread , i had to mess about with the thread over 14 test prints to get the thread pitch right but now screws into the aluminium block and holds tight enough to compress the silicon O-ring giving it a pretty good seal.

its in two part for ease of printing with no supports , because cleaning up thread that has supports is a pain .

I just epoxy the tube into the nut and slipped on an O-ring and seems all good least it does not leak, let me know if you need something else i made this in tinker cad as a fairly quick project to solve a problem , but someone else may find it helpful for their project .

 

Tags