1 / 8
Canon EOS M200 Side Grip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Side grip for Canon EOS M200 attached with three screws and double-sided tape.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 33
- Makes
- 0
- Views
- 310
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I modeled this Canon EOS M200 side grip to attach to the camera using the three screws on the right side of the body. Unfortunately it still wiggled a little so I cut a 27mm x 10mm piece of double-sided tape to secure the grip to the front of the camera. I used M2x6 screws. I printed this grip in ASA so I could vapor smooth it with acetone, though you could just sand it as well.
Remember to scale the model up to accommodate for shrinkage if you choose to print with ABA or ASA.