1 / 1
Spoilboard for Milo w/Fabreeko Fixture Plate — image 1

Spoilboard for Milo w/Fabreeko Fixture Plate

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a template for a ¾ inch MDF waste board that will mate up with the Fabreeko fixture plate for Milo CNC Mill.

Rating
0 / 5
Likes
7
Downloads
28
Makes
0
Views
169
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Public Domain

This is a template for a ¾ inch MDF waste board that will mate up with the Fabreeko fixture plate with 6mm holes used on a Milo CNC Mill. 

You can import the appropriate file into your favorite CAM software to setup the operations and tool paths.

Features countersunk holes to mount the spoil board to the fixture plate and 6mm holes matched pattern to use your pins or 6mm screws with hold down clamps.  Allows you to mill through  stock into the spoil board without damaging your bits or the fixture plate.

Use best safety practices when using this spoil board, hold down clamps, bits, or mill during operations. Use at your own risk.

 

Tags