OG star tracker stationary part and 3/8" camera holder for Smallrig Selection tripod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is an alternative stationary part, which is wobbling less, specifically for a Smallrig Selection tripod.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi,
I got a Smallrig Selection tripod, which already seemed sturdy enough for using with the OG star tracker.
But I was worried, that the default ¼" stationary part wouldn't be enough, because had problems with the 3d printed threads getting ripped apart (and I don't want my telescope to fall onto the ground…). Also the mounting surface just seemed to small, what introduced a lot of wobbling.
That's why I tried making the contact surface bigger, and replace the 3d printed threads with metal.
I also made a new camera holder, that replaces the original one, because mine supports 3/8", so it allows using the ball head of the tripod.
Metal parts you need:
- 4x 12mm M3 hexagonal socket screws
- 1x 8mm M3 hexagonal socket screw
- 5x 4-6mm long M3 threaded inserts about
- 1x M5 hex bolt nut
- 1x 15-30mm 3/8" screw
- 1x 7-17mm 3/8" screw
Yeah, I used a M5 hex bolt nut, I just trust it the most for that job, I already managed to rip out some threaded inserts.
One of the 3/8" screws is being used for connectiont to the tripod, the other for the ball head. I bought the the 3/8" screws as a set of two (was just cheaper), cut one shorter, but probably you don't have the gear for that.
If you can't get one length of the 3/8" screw that fits for both or two different lengths for both applications for the 3/8" screw, just write a comment. I could design a new big pulley, which supports also longer 3/8" screws than those 17mm, if there's demand for that.
I think it should be also possible to replace the 4x 12mm M3 or that one 8mm M3 screw with one type, I only used different ones, because I had them lying around and didn't know, which are being used in the current version. Just write a comment, I could easily adapt it, so that you only need one length of those screws.
I hope printing and assembly is self explaining with the photos.
Feedback is appreciated.
Have fun!
PS: Idk how to name that one small part else