Bottle sleeve
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple bottle sleeve to protect against dents and loud clanging.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I purchased a new water bottle during my last trip to universal, but it did not come with a rubber sleeve at the bottom. I have older bottles that have them and I like that they don't dent as easy, or don't clang off of everything they hit. This is just a simple, low-profile sleeve, as I wanted to make sure it did not cover up any of the artwork.
The sleeve has a 75mm inner diameter, and wall thickness of 1.5mm. The thickness at the base is 2mm, but I am tempted to add some more thickness and round off the corners more.
I printed this at 100% infill in Overture TPU. If I do add some thickness to the bottom, i may change the infill to allow for more cushion.