HexiBox Series: The Wallop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dual Tang Band W5-1138SMF series-tuned bass-reflex active subwoofer.
- Rating
- 5 / 5
- Likes
- 278
- Downloads
- 915
- Makes
- 3
- Views
- 7,625
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
As seen on X and YouTube:
Designed for use with a pair of the Tang Band W5-1138SMF 5 1/4" drivers (wired in parallel) and the Dayton Audio SPA100-D plate amplifier. Use M4 threaded inserts 6mm deep / 6mm outer diameter, and Blu Tack to seal around everything. Set the low pass filter no higher than 80Hz & adjust volume as needed.
Drivers:
https://www.parts-express.com/Tang-Band-W5-1138SMF-5-1-4-Paper-Cone-Subwoofer-Speaker-264-917?quantity=1
Amp:
https://www.parts-express.com/Dayton-Audio-SPA100-D-100-Watt-Class-D-Subwoofer-Plate-Amplifier-300-805?quantity=1&srsltid=AfmBOoqLXiAh_Ops81laa4hP7SJOZJC0RbEeoTa4U7J3iUFw7fPtomQc
Threaded Inserts:
https://www.amazon.com/gp/product/B0CS6XGMFD
Screws:
https://www.amazon.com/gp/product/B0BMQ4WV1V
Recommended printing settings:
PLA is okay; PETG is better.
At least 4 walls (perimeters) all the way around.
At least 20% gyroid infill. (Higher is better.)
Print the woofer shield 100% solid.
For a two-tone look, swap colors 30mm up.
Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.