3D Printed DIY Volume Controller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This DIY is a volume controller that will insert inside the keyboard.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 23
- Makes
- 0
- Views
- 446
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This DIY is a volume controller that will insert inside the keyboard. (Developed for Mac only.)
From previous videos to now, I've built up from the default device to make one keyboard, so I've made a video so that even DIY beginners can follow it.
I also attached "3D model file" + "Arduino source code" below.
[Supplies]
1. Download Arduino Source Code: https://blog.kakaocdn.net/dn/buWqEI/btsJUuPkEwq/oWHEPvI5ljsp0qmFpddDGK/Volumcontrollermac.zip?attach=1&knm=tfile.zip
2. keyboard.h modified files:
https://blog.kakaocdn.net/dn/qxH5Q/btsJTCU4PdZ/36Y6iV8U7WldncbpqM7W01/keyboard_headerfiles.zip?attach=1&knm=tfile.zip
save path : Finder - Go - Go to Folder - ~Library - Arduino15 - libraries - Keyboard - src
3. Materials:
(1) Arudino Micro x 1
(2) NeoPixel ring (12LED) x 1
(2) Rotary Encoder (PEC11R-4015F-S0024) x1
(3) Resistor(10k ohm) x 4
(4) Capacitor(0.01uF) x 2