1 / 7
KOBRA 2 MAX Up position Filament Sensor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Up position of filament sensor and feed line
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 98
- Makes
- 2
- Views
- 586
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I still prefer the traditional filament placement because it is easier to work with in a chair. But I don't like the position of the filament sensor that is difficult to feed.
I upgrade position to above for easy to feed for me. also move all control cable together.
Material need; M3 x 20 2 pcs. & M3 x 10 or 15 mm. 1 pcs.
- Turn off the printer.
- Take out filament sensor , pneumatic connector and Teflon guide tube
- Place model on plate . use long arm hex key insert from top hole to install model in existing filament position with M3 x 10(15)
- Install filament sensor on top with 2 points(M3x20 mm)
- Install pneumatic connector and Teflon guide tube
- Cut cable tie at control cable in slot (under filament sensor) and move to new position