A1 Mini Ball Bearing Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ball Bearing Spool Holder for the A1 mini. Replaces factory spool holder
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 168
- Makes
- 0
- Views
- 1,092
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Ball Bearing Spool Holder for A1 Mini, bolts on in the factory location. The tension on the spool holder is adjustable by the nylon locking nut. If you want a finer adjustment you can get M8x1.00 fine thread hardware.
I printed the arm with a heavy wall count, Open side (Spool Side) down.
Print the Spool Screw and Spool Nut at 0.16 or less layer height standing up with the 3 sided handle ends down, only support the hole where the bearing goes. Print this way and there will be no thread clean up needed at all. I also printed these with a heavy wall count but im not sure how necessary that is.
You will need -
Printed Parts
(1) A1 Mini Spool Holder arm
(1) Spool Screw
(1) Spool Nut
Store Bought
(1) M8x1.25x120 bolt / screw
(6) M8 Flat Washer
(1) M8x1.25 Nylock Nut or regular nut and lock washer.
(2) 8x22x7 Bearings
(2) M3x12 screws
*If you prefer SAE you can use 5/16 hardware in place of M8. The bolt would be 5 inches long.
UPDATE 10042024 -
I added a slimmer arm that can be printed with the open side facing up.