Skull Candy DIsh with Assorted Lamp Holders
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Skull embossed Candy dish in assorted sizes, down to a Tea Light Holder and/or Pill size.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 44
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Attribution — Noncommercial
Skull embossed Candy dish in assorted sizes, down to a Tea Light Holder and/or Pill size.
The smallest (Skull Dish V4.stl) is actually a Tea light holder which is also modified into a goblet in assorted sizes.
The Larger Skull Candy Dish (Skulldish350.Stl) is the SkullDIshv4 scaled up 350%, using the Bambu Studio SCALE function, which results in the dimensions - Height 101.5 mm, Width = 185.4 by 163.4 mm ..
The Middle Skull Candy disk (SkullDish300.Stl) is the SkullDIshv4 scaled up 300%, using the Bambu Studio SCALE function, which results in the dimensions - Height 87 mm, Width = 159 by 140 mm ..
The TeaLight82.Stl is the smaller of the 2 goblets, dimensions - Height 82 mm, Width = 53 by 47 mm ..
The TeaLight115.Stl is the larger of the 2 goblets, is the TeaLight82.Stl scaled up 140%, using the Bambu Studio SCALE function, dimensions - Height 114.8 mm, Width = 75 by 66 mm ..
The tea lights I used are linked below, but the round spaces for the Led Lamps are sized to minimum 37mm so most should fit.
https://www.amazon.de/-/en/eLander-candles-lights-flameless-automatic/dp/B01DVXDPRW
All skull candy dish pieces printed using the following Slicer Settings with .20 Standard Layer
The Goblets (Tea Holder model( used the same settings but with .12 Fine Layer Height
Filament: Sunlu Meta Cream White PLA
Infill Density - 10%
Infill Pattern Gyroid
Supports:
Enabled
Tree(Auto)
Threshold: 30
On Build Plate Only
Top Z Distance: 0.3
Bottom Z Distance: 0.2
Top Interface Layers: 1
Bottom Interface Layers: 1