12v adapter for makita battery 18v.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Makita battery adapter. I did this project for a personal need, to power portable screens for my work at 12v.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 363
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Makita battery adapter.
I did this project for a personal need, to power portable screens for my work at 12v.
I used some electronic components:
-Dc dc converter
-Power tool for the battery
-5.5mm jack power connector
With this project you have total freedom, having the adjustable dc dc converter it is possible to make a variable power supply according to needs.
With the converter I used voltages can be adjusted
Input: 3.0v - 40v
output: 1.5v - 35v
You can change the output connector according to your needs.
During construction I realized that there was no cooling grill for the integrated circuit, so I made the 3D model, but I made do by making holes with the drill, I recommend printing the correct cover directly.
the two triangles in the corners are used to make holes with the drill and insert two small self-tapping screws to close the lid.
I hope this project can be useful for some of you!, if you were to print it and do it too, write to me in the DMs I would be very happy to see how you use this project.
Happy 3D printing everyone.