1 / 1
Voron Design Maker Chip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Multi color Voron Design maker chip with vorondesign.com QR code
- Rating
- 0 / 5
- Likes
- 48
- Downloads
- 174
- Makes
- 0
- Views
- 777
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Voron Design Maker Chip inspired by K2_Kevin but modeled from scratch in Fusion 360.
These are the recommended print settings:
Material: PLA
Layer height: 0.2mm
Extrusion width: 0.4mm
Infill percentage: 80%+
Infill type: grid, gyroid, honeycomb, triangle, or cubic
Wall count: Top/Bottom=1
Solid top/bottom layers: 5