5015 heatbreak fan adapter for Neptune 3 Pro/Plus/Max
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows you to use 5015 instead of 4015 fan
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 113
- Makes
- 0
- Views
- 828
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Update 1.1 – print optimization and minor fixes
You'll need 2xM2 6mm bolts for duct and 1xM2 16mm bolt for fan mount.
Designed for Sunon fans, Younuon fans also fit fine. Fan should be installed at a 10° angle (see last picture) and should make a clicking sound when installed.
You can set fan_speed at 0.6 if you installed larger mcu fan (mcu fan uses the same pin, so it'll slow down too). Your config should look like this:
[heater_fan hotend_fan]
pin: PB0
heater: extruder
heater_temp: 50.0
cycle_time: 0.065
kick_start_time: 0.100
fan_speed: 0.6
hardware_pwm: False
off_below: 0.0