Gewehrhalterung, rifle mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gewehrhalterung, rifle mount
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 109
- Makes
- 0
- Views
- 736
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Gewehrhalterung. Für den Zusammenbau wird weiters benötigt: Schraube Sechskant M6 x 90 mm lang, Beilagscheibe mit möglichst großen Außendurchmesser (z.B. 20mm), Feder (nicht unbedingt notwendig) Durchmesser innen 8 mm, Länge ca 30 mm. Gummimatte mit 2 bis 3 mm Stärke.
Eventuell Gewindeeinsätze von 3/8" UNC auf 1/4" UNC - Kameragewinde.
Gedruckt mit PLA, 6 Perimeter, 6 Deckschichten, 6 Bodenschichten, Infill 30% 3D-Bienenwabe.
…………………………….
Rifle mount. The following is also required for assembly: hexagon screw M6 x 90 mm long, washer with the largest possible outer diameter (e.g. 20 mm), spring (not absolutely necessary) inner diameter 8 mm, length approx. 30 mm. Rubber mat with a thickness of 2 to 3 mm.
Possibly thread inserts from 3/8" UNC to 1/4" UNC - camera thread.
Printed with PLA, 6 perimeters, 6 top layers, 6 bottom layers, infill 30% 3D honeycomb.