Desk shelf organizer

I wanted a simple desk organizer and a shelf, to keep my desk clean.

The hole thing is based on IKEA's shelf “Bergshult”.  The top drawer on the right holds SD cards and a USB card reader. There are 2 versions of the phone/tablet holder, the 2nd version is a bit longer so it can hold my iPad, without blocking the bottom of my screen. The small shelf for my notepads is mounted with some 3m stripes. I added a mount for an USB hub (https://www.amazon.de/gp/product/B07VMXG354/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1), which can be attached with some screws. I wanted to use some threaded inserts and grub screws, but after printing it, the hub holds fine just by friction (it needed some gentle force to get in place). The pen holder fits perfect underneath the shelf and holds all the pens i need and some USB-sticks too, on the bottom is a horizontal compartment for an external SSD-Drive.

For assembly use  2 screws for each leg or just 3M tape. If you opt for screws, use a drill to prepare some holes. I used a 3mm drill bit and simply drilled through the holes while holding the shelf in place.

For a cleaner result, use organic support on the top, middle and bottom drawers (on the handle in the front), the rest will print fine without support.

I was heavily inspired by Raz's Desk Organizer but wanted a different, more bulky design.

To make remixing easier I uploaded step files as well.