1 / 1
Reloading: empty case storage / sorter / strainer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
I've got models for 223, 308 (& family), Magnum family (e.g. 300 prc)
The baskets need to be printed in vase mode with 0.8mm wall thickness, I've had no problems with PLA or PETG though PETG is probably better, PLA is plenty flexible enough.
Also included is a divider for each size, so if you can't fill your basket, put a divider in so your cases don't fall over. Dividers, print however you like: doesn't need much fill.