DEMON SLAYER LOGO HUEFORGE 200x205
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hueforge of DemonSlyer Logo
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 78
- Makes
- 0
- Views
- 273
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Project: demonslayer logo.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x204.52mm in size
You may print at higher layer heights below the Min Depth of 1.2mm
The Max Depth is 3mm and the Actual Depth is 3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #21 (1.76mm) swap to White
At layer #28 (2.32mm) swap to Red
WARNING: This Slider is at the same Layer as the Next Slider
At layer #37 (3.04mm) swap to Charcoal for the rest.