1 / 2
Medal hanger - RUN
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A medal hanger to be screwed on wall Holds up to 12 medals
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 130
- Makes
- 1
- Views
- 647
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Settings:
- Layer Height: 0.2 mm
- Infill: 20%
- Supports: No supports
- Material: PLA or PETG recommended
1 holder and 4 spacer needed.
Two spacers (on bottom) should be glued with super glue
Two spacer (on Top) are attached with M3 screws.