Fluke Clampmeter 378 cable managment and probe holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made this to hold my leads when not in use.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 117
- Makes
- 2
- Views
- 840
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
If you want to use this for a clamp meter that is different from the fluke 378/377 send me comment and I'll see what I can do
Have attached a video to show the different ways I use to store them. Print with 2 walls and zero infill. Any filament like PLA or PETG should work.
This part has a clip mechanism to hold it in place. Wait for it to cool and insert a test probe or pick in this spot. a screwdriver can also help. Slide it on to the meter and push the clip shut.
When you start to wind the cables use your palm to keep tension off the base of the leads. Naturally, I am not responsible for any damage your leads may experience. However, as long as you keep the tension off the ends as shown in the video and there shouldn't be a problem. As always make sure to test continuity on your leads before using.
please leave a like or comment if you found it useful
V5 improvements: Stronger probe holders, tougher clip and a rounder hook to reduce cable fatigue. print with 4 walls 0% infill.
Optional Bottom clip can also be printed and leads can wrapped like so. It also helps take the pressure off the ends of the cables. Will need strong double sided tape
