63mm / 2½" automated ball valve gate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MG995 controlled automatic ball valve gate
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 59
- Makes
- 1
- Views
- 611
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Automatic blast gates, using them to collect wood chips / dust.
63mm / 2½" printed ball valve
MG996 motor controls the valve, all MG996 motors are connected to a smart IOT device, I control the motors via Home Assistant.
For one blast gate you'll need to print:
2 x Outer case
1 x Rotator
1 x Bearing insert (the elongated part should be push in on top of the smaller part, might need to sand the edges)
2 x Flange seal
1 x Servo holder (it fits in snugly, but I used CA glue to secure MG996 to the holder itself)
1 x Bracket (not necessary if you're not securing this to a wall)
Additional materials:
4 x M4 x 20mm
4x M4 nuts