llavero bellingham
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
llavero hecho con hueforge
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
Project: bellingham.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50x62.53mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.8mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA smartfil carne Transmission Distance: 1.6
PLA smatfil amarillo Transmission Distance: 5.8
PLA smartfil gris Transmission Distance: 0.8
PLA smartfil White Transmission Distance: 6
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #14 (1.2mm) swap to carne
At layer #21 (1.76mm) swap to amarillo
At layer #23 (1.92mm) swap to gris
At layer #26 (2.16mm) swap to White for the rest.