1 / 4
TradRack Lane Pre-gate sensor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
gate for tradrack with pre-gate sensor
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 147
- Makes
- 1
- Views
- 1,229
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model of pre-gate sensor does not require to solder wires to the pins of the switch, which can be a chore when doing several of them. You only need a 5-pin female JST 2.54, which you will crimp only the most outside pins (1 and 5), leaving the others empty and insert it under the gate to make contact with the switch.
Additional materials:
- 1x Omron D2F-L sensor
- 1x JST XH male housing with 5 pins (2.54mm)
- 2x JST XH female metal crimp
- 1x 4mm metal sphere
- Wires
Consider using some modifications that I made