1 / 4
Wide Nozzle for Ryobi 40V Leaf Blower
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a wide nozzle attachment for a Ryobi model#RY40402 40V leaf blower. It replaces the original (round) nozzle.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 135
- Makes
- 0
- Views
- 1,083
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
This is a wide nozzle attachment for a Ryobi model#RY40402 40V leaf blower. I made it to speed-up blowing leaves and grass clippings off the driveway. It replaces the original (round) nozzle that is included with the blower. I used two latches to hold the upper and lower part together so it would not move around so much.
- 0.4mm nozzle
- 0.2mm layer height
- 15% infill
- Both pieces will fit on one plate but I prefer to print on separate plates
- Support required for the lower piece. I used tree supports.
- Support for the upper piece is optional. I did not use support when printing the upper piece.
- Make sure you have calibrated for the filament you are using as some of the tolerances are a snug fit.