Blackstone Griddle Leveling Shims (1/8")
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shims to help you level your Blackstone griddle. 1/8" increments.
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 441
- Makes
- 2
- Views
- 1,070
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Leveling shims for your Blackstone. The original version provides a single size, which gives you a ¼" rise with a wheel. Each one you stack, though, gives you ½" increase. I needed ½" total height increase, so I wanted to remix this. Additionally, with 3D printing, the weight of the wheel would be greatly reliant on the infill. So I added some holes down the center to provide perimeter walls directly under the wheels for better support. They also let rain water drain through.
I decided to create variants in 1/8th inch increments to satisfy my OCD. Not sure they're really necessary, but I was really wanting a 1/8" shim to get my Blackstone perfectly level.
Printing
- Material: recommend PETG or ASA to provide some UV protection
- Layer Height: 0.20mm is what I used, but any should work.
- Perimeters: 3 for a bit of added strength
- Infill: 15% gyroid seemed to work for me
Support
If you like my designs and want to make my day, you can buy me a ☕!