1 / 3
Sunlu Filament Connector FC01
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity storage box for the FC01, teflon tube and the power cable, divider walls change the layout.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 134
- Makes
- 5
- Views
- 1,576
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
v2 changes
- Add lip to hold down front.
- Add the possibility to use the connector inside in the case.
- Better fit.
- Chamfer on the back so the lid can move freely.
- Notch so filament can lay flat.
(the lip and the cable hold down the FC01 so it doesn't move. )
Test heated it on 230c and let it sitt for 10 min to see how hot it got.
(Se thermal picture)
You might get away with PLA.
If you going to use it for longer time i recommend printing it PETG (or filament with Glass Transition Temperatures)
No need for support