Ambrogio L60 lift kit for + 10mm cutting height
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Need more clearance for Ambrogio L60 lawn robots? Here is bigger wheels.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
I thought I needed more clearance and bigger cutting lenght for my Ambrogio L60 as it struggled with moss, deep grass, holes and apples on my lawn. This replaces the original rubber tires. They can be disassembled to be replaced by one High Clearance Wheel and one High Clearance Spacer each. As they interlock they must be one way and another, you are going to figure it out.
If you use the guide wheels, they are now too far down and need to be lifted for the sensors to work, too. There is bigger ones available, however I also bent the arms straight which required further disassembly as they may get run over on rough terrain now. Disable and lift the arms or bend the arms as seen on one picture if necessary.
It has gained speed, can manouver and cut in deeper grass sections and doesnt get stuck as often on treacherous terrain.
This is made in jet black PETG with 3 outer layers and holds up the whole season already. Was always concerned when it gets stuck in the sun for the tires to go limp so would do again in white if it was me, but no problems so far.