1 / 13
Beacon Bed Scanner Mount for RatRig vCore 3.1 EVA3 Assembly
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This update allows mounting a Beacon3D bed scanner on a stock RatRig 3.1 EVA3 Assembly.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 121
- Makes
- 0
- Views
- 584
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This model includes two modified parts incorporated into the EVA3 Assembly the comes with the RatRig vCore3.1 printers. These changes allow mounting of a Beacon3D scanner (revH - low profile) underneath the EVA3 behind the Phaetus hot end.
Print parameters - The settings recommended by RatRig for printing parts are as follows
- Layer Height: 0.2 - 0.3 mm
- Perimeters: 4 x 0.45mm
- Infill: 25%
- Supports: None
- Material: PETG or ABS (preferred)
The attached photos and screen shots show the cad model and the Beacon scanner mounted on the EVA3.