Bambu Labs P1S/P1P 2nd Dual Aux Fan Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A dual fan adapter for Bambu Labs P1S/P1P (and possibly X1?)
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 40
- Makes
- 0
- Views
- 858
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
An adapter to allow the use of a second aux fan on the right-hand side of the printer.
You will need an additional standard auxiliary fan, Bambu Labs sell them as spares.
Use the screws that come with the fan to attach it to the rail - be careful not to overtighten.
I used double sided sticky table to hold the main body of the fan for a bit of extra support.
You will also need to wire the second fan up to your main board - ideally, create a Y cable connected to the existing aux fan. You should power the second aux fan directly from the power supply - using just the PWM control from the main board.
This printable has all the instructions for wiring: https://www.printables.com/model/435312-bambu-lab-p1-x1-dual-aux-fan-725-updated
I suggest printing it out of something heat-friendly.
