TronXY X5SA Z axis stoppers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Tronxy X5SA bed just keeps loosing the aligment betwen the two Z screws...
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 39
- Makes
- 0
- Views
- 228
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
The Tronxy X5SA bed just keeps loosing the aligment betwen the two Z screws...
And sometimes likes to crush the nozzle on the bed.
This simple Z stoppers works like a charm to reset the aligment, just rises de bed manually with the motors off... or use the menu control until the steppers start skipping, and it's done! (the noise is not that elegant, but harmless... )
For my printer, 2019 TronXY X5SA 24v the stopper height was 28,5mm...
After install it, you must move Z up until it hits the stopper, and manually level your bed as the nozzle just touchs the surface.
all credits FritzSM