1 / 3
Compact GT2 driven open differential for RC car
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact differential that's supposed to be driven by a GT2 timing belt. Measurements: 69mm x 38mm x 38mm.
- Rating
- 0 / 5
- Likes
- 33
- Downloads
- 104
- Makes
- 0
- Views
- 912
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Compact differential that's supposed to be driven by a GT2 timing belt.
Its compact size allows for installation in even small projects.
Measurements: 69mm x 38mm x 38mm.
GT2 tooth count: 44.
Designed with common sized bearings.
To build it, you'll need:
4x Bearing:
- width 7mm,
- outer diameter 22mm,
- inner diameter 8mm,
2x Bearing:
- width 5mm,
- outer diameter 13mm,
- inner diameter 6mm,
Printed parts:
1x diff_gt2_cage.stI
2x diff_pinion_gear.stl
2x diff_side_gear.stl
1x diff_casing_full.stl
1x diff_casing_empty.stl
1x diff_pinion_shaft.stl
2x hex_shaft.stl
2x spacer_small.stl
2x spacer_big.stl