Hookee on the wall
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Hookee trainer is pretty nice, but there's no wall mount, which is annoying. So let's fix that!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Share Alike
The Hookee doesn't come with a wall mount. The door mount that it does come with is overengineered and doesn't fit narrow door frames like mine.
So let's fix that.
This wall mount is suitable for storage as well as for training. If you use it for storage only, you can skip the bolt+nut and use a pencil (or something equally flimsy) instead. If you use it for training only, you can skip the hook, it's only there so the Hookee doesn't open by itself.
The mount requires two 8mm bolts (a third is in the picture. for reference) and two oversized washers. I used 10mm dowels. There should be no stability problems with mounting on a brick wall. If you have drywalls, ask a professional. YMMV and all that.
Print slowly with freshly-dried PETG, temperature on the high end, 0.1mm layer height (at the height of the threads, otherwise they won't work well), 25% infill, 4 perimeter layers. That way the printed bolt is pretty much unbreakable.
Built with Python using build123d and bd_warehouse.